ZeroxCare Paint Protection Film - 7.5

Initial care (First 48~72 Hours After installation):

Do not wash or wax your vehicle for the first 48 -72 hours to allow the adhesive to fully cure. Avoid exposing the film to high-pressure water, automatic car washes or harsh, chemicals during this period. If any small bubbles appear, they typically dissipate on their own as the film cures

Wash your vehicle regularly using a pH neutral car shampoo and soft microfiber mitts.

Use only non-abrasive waxes or sealants approved for use on PPF films. Remove insect residue, bird droppings, tree sap, and other contaminants as soon as possible to prevent surface staining. Conduct periodic inspections by your authorized BRAND installer to ensure film performance.

Do not use abrasive polishes, compound pads, or clay bars on the film surface.

Do not use high-pressure water jets directly at the film edges.

Do not apply harsh solvents, petroleum-based cleaners, or degreasers.

Avoid automatic car washes with rotating brushes.

Avoid prolonged exposure to fuel spills - clean any fuel residue immediately.

Model No.: ZX-PPF-7.5

Film Type: TPU

Finish: Gloss

Thickness: 8.5 mil

Size: 1.52 x 15m/ 60in16Yd

Color: Crystal Clear

Adhesive Type: Pressure-sensitive, repositionable

Self-Healing: Yes

UV Resistance: Yes

Hydrophobic Coating: Yes