ZeroxCare Pro Swirl Remover Polish - Z4301

Swirl and Hologram Elimination: Removes fine surface defects, light buffer trails, and hazing for a flawless finish.

Advanced Micro-Abrasive Formula: Gently refines the surface without adding new defects.

Mirror-Like Gloss: Enhances paint depth and clarity, leaving behind a radiant, show-car shine.

Safe for All Paint Types: Works on modern clear coats, single-stage paints, and freshly refinished surfaces.

Low Dust, Easy Wipe-Off: Produces minimal residue for a clean polishing experience and effortless removal.

Body Shop Safe & Silicone-Free: Won’t interfere with paint application or protective coatings.

Surface Preparation: Use after compounding to refine the finish. Ensure the surface is clean and dry.

Shake Well: Shake the bottle thoroughly to mix micro-abrasives evenly.

Apply to Pad: Apply 3–4 pea-sized drops to a soft foam polishing or finishing pad.

Polish the Surface:

• Use a DA or rotary polisher at low to medium speed.
• Work in small sections (2x2 ft.) with light to moderate pressure.
• Make overlapping passes until product starts to clear.

Buff Off Residue: Wipe clean with a soft microfiber towel to reveal high-gloss results.

Inspect and Repeat: If needed, repeat on stubborn areas to enhance clarity and uniformity.

Pad Selection Matters: Use a soft finishing pad for minimal cut and maximum clarity. Avoid aggressive pads.

Work Cool & Controlled: Avoid excessive heat or pressure; allow the micro-abrasives to refine gradually.

Layer Wisely: After polishing, follow with a sealant or wax to lock in the shine and protect the finish.

Clean Pads Often: Residue buildup can reduce polishing performance—clean pads between panels.

Final Wipe: Use a panel wipe or IPA-based solution before applying protection for best bonding.