ZeroxCare Precious Cut Compound - Z5001

Aggressive Defect Removal: Eliminates 1000 grit or finer sanding scratches with speed and precision.

Haze-Free Finish: Leaves a clean, glossy surface that’s ready for polish or protection—no hazing or dullness.

Low Dusting Formula: Minimizes residue and cleanup time during high-speed corrections.

Silicone-Free & Body Shop Safe: Compatible with paint booths and fresh paint surfaces; leaves no residue that interferes with refinishing.

VOC Compliant: Meets environmental and professional standards for safety and performance.

Compatible with All Paint Systems: Effective on clear coats, single-stage paint, and modern ceramic finishes.

Preparation: Wash and dry the vehicle. If needed, clay bar the surface to remove bonded contaminants.

Shake Well: Always shake the bottle before use to ensure even distribution of abrasives.

Apply to Pad: Dispense a moderate amount of compound onto a foam or wool cutting pad.

Polish Surface:

• Use a rotary or dual-action (DA) polisher at low to medium speed.
• Work in 2x2 ft. sections using overlapping passes with moderate pressure.

Wipe Off Residue: Remove residue with a clean microfiber towel.

Inspect Results: Repeat as necessary for deeper imperfections. Follow up with a finishing polish if desired.

• Pad Selection Matters: Use a wool pad for faster cutting or a foam pad for more control and less heat buildup.

• Don’t Overwork the Product: Compound performs best when not overextended—2–3 section passes are ideal.

• Keep Pads Clean: Regularly clean pads during use to maintain cutting efficiency and avoid micro-marring.

• Follow with Finishing Polish: For a show-car finish, follow with a fine polish like ZeroxCare Ultra Refine Polish before sealing.

• Work in Controlled Conditions: Apply in a clean, shaded environment to ensure optimal results and prevent surface contamination.