ZeroxCare Black Cut Compound Plus - Z8701

High-Cut Performance – Quickly removes 1,200 grit sanding marks, oxidation, and deep scratches.

Low Dust, Low Splatter Formula – Keeps work areas clean and reduces cleanup time.

Minimizes Swirl Marks – Cuts fast while leaving minimal micro-marring.

Body Shop Safe – Silicone-free and safe for use in paint correction and refinishing environments.

Optimized for High-Solids Paint – Ideal for modern automotive finishes including OEM and refinished surfaces.

1. Preparation: Ensure the surface is clean, dry, and free from loose contaminants. Shake well before use.

2. Pad Selection: Apply to a heavy-cut foam or wool pad for best results.

3. Application: Dispense 3–4 pea-sized drops onto the pad.

4. Polishing: Using a rotary or dual-action polisher, work the product into the surface at low to medium speed, applying moderate pressure.

5. Finishing: Work in small sections until the compound breaks down and begins to clear.

6. Wipe Off: Remove residue with a clean microfiber towel before it dries.

• For deeper defects, start with a wool pad for aggressive cutting, then refine with a foam pad and a finishing polish.

• Avoid overloading the pad—less product ensures better control and reduces sling.

• Clean the pad regularly during use to maintain cutting efficiency.

• Follow with ZeroxCare Pro Swirl Remover Polish to refine the finish and enhance gloss.

• Always inspect the surface under proper lighting to ensure full correction.